GTA Gear Oil Additive

FOVAC® GTA Gear Oil Additive is designed for industrial and automotive applications. FOVAC _® GTA is compatible with synthetic and conventional lubricants of all weights. When added to lubricants, it will improve it’s ability to resist heat, reduce friction and mechanical stress and also will prevent leaks, wear, and heat buildup. It cleans metal housings, gears, and bearings of varnish and other residues, holding them in suspension until the oil is changed.

FOVAC _® GTA increases load ratings by increasing the strength of the oil by as much as eight times.

FOVAC _® GTA greatly extends the life of gears and bearings, while reducing costly maintenance and down-time.

FOVAC _® GTA does not affect the viscosity of the lubricant to which it is added. Neither will it settle out or cause harmful deposits that could clog filters and restrict oil flow.

FOVAC _® GTA works at all operating temperatures and will not separate, even when heated to 500 degrees Fahrenheit. FOVAC _® GTA anti-foaming agents protect even high-rpm operations. For most gear reduction units, differentials, transmissions, bearings, and industrial drive units, an application of 1 part FOVAC _® GTA to 65 parts gear lube is adequate for maximum results.

FOVAC _® GTA can be added to existing lubricants without the cost of changing out the lubricant already there. This reduces costly down-time. FOVAC _® GTA actually extends the life of the oil by reducing heat and its cause, friction. Particulate contaminates are greatly reduced, and the time between oil changes is extended. The cost of using FOVAC _® GTA is more than offset by the savings and will reduce gear noise and whine and add significant life to any manual transmission, differential, transfer case, gear drive and steering gear regardless of its condition or age.